Features:
1. Support Card: ATM/CAC/ID/IC/SIS/Credit Cards
2. Supported Card Types: 5V, 3V and 1.8V Smart Cards ISO 7816 Class A, B and C
3. Standard: ISO 7816 & EMV Level 1 & T=0 and T=1 Protocols
4. Host Interface: USB 2.0 CCID1 (also compliant with USB 1.1)
5. Smart Card Interface Speed: 420 Kbps (when supported by card)
6. Power Supply: Bus Powered
7. PC/SC Driver Support:
Windows® 98 / ME, 200 / XP (32bit), 2003 Server
Windows® CE 5.0 (depending on hardware)
Windows® Vista (32bit / 64bit)
Windows® 7 and Above
Linux®
Standard Compliance
Support EMV Level 1 specification
Support USB 2.0 full speed
Based on ISO7816 implementation
Support PC Smart Card industry standard – PC/SC 2.0
Support Microsoft Smart Card for Windows
Meet Microsoft WHQL USB Smart Card Reader requirements
Meet US Federal Information Processing Standards (FIPS) Publication 201
requirements on smart card reader interoperability
Support single slot
Support T0, T1 protocol
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via
external EEPROM
Support ISO7816 Class A, B and C (5V/3V/1.8V) card
Implemented as an USB full speed device with bulk transfer endpoint, Mass
Storage endpoint
Built-in PLL for USB and Smart Card clocks requirement
Support EEPROM for USB descriptors customization (PID/VID/ iManufacturer/
iProduct/Serial Number), Direct Web Page Link, and accessing memory card
module.
EEPROM programmable via USB interface
Support software update for memory card module
Support Direct Web Page Link via configuration in external EEPROM
Support short APDU and extended APDU
Compatible with Microsoft USB-CCID driver
Support remote wake up through inserting card/removing card
Support USB selective suspend
Support Power Saving Mode (Using one pin to select between Normal/PWR
Saving Mode)